PY-950H High speed roll die cutting & creasing machine

PY-950H High speed roll die cutting & creasing machine

Advantage:

1. Alarm function of oil circulate system,if machine be short of oil,machine will stop automatic,let machine life be more longer.

2. Direct drive servo motor, now add reducer device

3. New feeding paper roller

4. Feeding paper plate no up and down move,can ensure thin paper running more faster and stable.

5. Oil cooling device outside(old type machine Oil cooling device inside machine,no easy operation,oil pressure also go up easy),can ensure machine oil pressure be much more better.

6. Machine body up and down running,from single lead rail to double lead rails

7. Cutting speed more and more faster,so our main motor and drive also use bigger type.

Main Feature:

1.The working speed is 90-150times per minute,the level of the capacity in China is 120times per minute. It has the ability to die-cutting, creasing and embossing for various shapes.

2. Paper conveyed by servo motor to ensures steady and accurate conveying. photoelectricity sensor checks the color code of printing to ensure fix the paper position accurately.

3. Electric control system uses PLC and HMI. Equipped with safety refinements to make acoustic – optical alarming and auto stop when some faults.

4. Worm wheel and worm transmission system ensures the powerful and steady pressure;It is very convenient and accurate to adjust pressure through HMI.

5.Lubricating with oil circulation and alarming when lack of oil to ensure smooth running and prolong the machine life.

6. The die-cutting frame uses pneumatic locking system to convenient operation. Die-cutting down steel board from Taiwan is accurate and lasts forever.

7.It adapts electric control pneumatic clutch to protect the machine when start and emergency stop..The flywheel provides a mounting location to the clutch and also can increase the pressure.

Advantage and improvement:

1.Machine Host. New design: Worm and Worm wheel together with crankshaft same as the sheet die-cutting machine. The previous design: off-center shaft.

2.Pressure Adjusted. New design: The pressure is automatic adjusted through the motor to control the four feet by HMI. And the pressure can be shown in the HMI. It is very convenient and accurate. The previous design: manual adjusted through gear wheel or the screw. 

3.Positioning block in movable platform we add one more positioning block in movable platform. It makes the pressure of the platform more stable, and endurable.

4.Oil circuit. New design: The outside oil circuit adds a filter to clear the oil and a flow switch to monitor lacking oil. The previous oil circuit is crude and confused.(the first machinery equips with alarming of oil lacked)

5.The main driving part in host is protected by the lubrication system. If the data shows problem, the machine will stop and alarming. Then you must check the driving parts                    

6. Air cylinder paper pressure system. In front of the paper feeding platform, we add the air cylinder paper pressure system to ensure the paper convey more smoothly and quickly.  We are the first one and the only one machinery who adds this system.                            

7.PLC program: The new design: We make two PLC program to fit for the different quality of printing. Be more functional and accurate

8. Paper feeding balance regulator add new type paper feeding balance regulator to adjust he minor unbalance situation.

9.Paper damper. In order to avoid the paper shaking, we add one more damper to make the paper tractable. The paper leech on the damper when machine is running. So we can feed paper more stable and faster

10.Roll Paper Loading: The new design: the hydraulic cylinder pushes downward, so it is stronger than the previous design.  

11.Paper blocked alarm system. The new design adds the alarm system to make the machine stop when paper feeding blocked.